Custom Masking Designs - Overmolded Bolt Plugs
-
By Lee Lechner
- Oct 16, 2026
Threaded blind holes are some of the hardest features to mask. The hole has no back side to pull a plug through, and the threads give coating plenty of places to creep in. If the mask lets go partway through the line, the part comes off with coated threads. That means chasing or re-tapping every hole by hand, or scrapping the part.
Most finishers start with a push plug, and for many jobs that works. When the plug keeps letting coating into the threads, though, it’s time for a mask that threads in instead of pushing in.
What Is An Overmolded Masking Plug?
It’s a steel bolt with a high-temperature silicone mask molded around it. The bolt threads into the hole you’re protecting. As it seats, the silicone presses down into the bore and against the surrounding face. The steel bolt holds the mask in place, and the silicone does the masking.


Why Threading In Beats Pushing In
A push plug stays in place through friction alone. That’s fine for many through holes. In a threaded blind hole, though, you usually can’t push the plug in far enough to seal well, and friction is all that’s holding it there.
An over-molded plug works differently:
- Steady downward pressure. Threading the plug in presses the silicone firmly into the bore. That’s hard to do any other way in a blind hole.
- It stays put through the whole process. The plug can’t work loose like a friction-fit mask can. It holds through washing, coating, and cure.
- It holds up in the oven. Steel and silicone handle cure temperatures that rule out threaded plastic plugs.
Where It Makes The Biggest Difference: E-Coating
Powder tends to build up around a silicone mask. E-coat is less forgiving. It is immersion processes, and the bath will get under any mask that isn’t tightly sealed. If you’re getting coating in threaded holes on e-coat lines, the seal is usually the problem, and this is where an over-molded plug pays off.
Where They're Being Used
Over-molded plugs are in production at automotive and powersports suppliers today, in metric sizes from M4 through M10. Typical applications include:
- EV battery trays going through e-coat
- Vehicle frames and structural parts
- Mounting points where a bolt-and-washer face has to stay coating-free


On that last one, an automotive supplier needed a bare mounting face around a threaded hole where a bolt and washer would attach. An earlier friction-fit design didn’t seal well enough, and a threaded plastic plug wouldn’t have survived their cure ovens. Echo designed an M10 over-molded plug with an added flange that masks both the threads and the mounting face in one piece.
Customization Options
Because every overmolded plug is a custom part, it can be designed around your line:
- Flanges to mask a mounting face or spot face along with the threads
- Common head sizes across thread sizes, so operators use one wrench or driver for every plug
- Color-coded heads (for example M6, M8 and M10) when head sizes can’t be shared, so operators grab the right plug every time


Trade-offs to know
- Cost per plug. An overmolded plug costs more than a catalog silicone plug. The return comes from the work you no longer do: no chasing or re-tapping threads after coating, and fewer rejected parts.
- Don’t over-tighten. The plug only needs to be snug enough to seat the silicone. Over-tightening can dent thin parts like battery trays and can tear the silicone off the bolt.
Is An Overmolded Masking Bolt Plug For You?
It’s worth a look if you’re:
- Masking threaded blind holes for e-coat or powder coating
- Losing push plugs partway through the line
- Chasing or re-tapping threads after coating
- Needing a bare mounting face around a threaded hole
Talk To Echo About Your Masking Problem
Echo Engineering has designed custom masking for powder coaters, e-coaters, and platers for more than 60 years. Send us a print or a sample part, and our engineers will recommend the right mask, whether that’s a catalog plug or a custom over-molded design.




