Tagged with 'Powder Coating'

We listed multiple ways you can speed up your masking process and be more efficient, saving time and money in the process.

If you're getting started with powder coating, this post will take you through the essential masking supplies that we recommend starting off with first.

Masking is crucial in the coating process, especially for complex components like those found in steering and suspension systems. These parts often feature complex geometries, tight tolerances, and critical surfaces that must remain uncoated to ensure optimal performance.

Throughout this post, we will take you through various masking products and designs used to mask shock tubes, steering knuckles, tie-rods, and control arms that are manufactured for today's most famous automotive, heavy machinery, and power sports vehicles!

Powder coaters are accepting flaws they could easily eliminate. We’ve curated a list of common issues that are often overlook and provided simple fixes for each one.

In this post, we are going to take you through the primary methods for masking off mating surfaces before going through the coating process.

Powder coating masking tapes that are recommended for your powder coating process based on temperature and coating thickness requirements.

Learn about how conductive silicone is becoming a go-to option for powder coaters looking for better ways of hanging and masking the parts they're coating.

If you're a powder coater wanting to make changes to improve your masking operations, this post is for you! Echo Engineering is here to guide you through actionable changes that can revolutionize your masking processes and elevate your results.

Not sure when you should be using a new silicone mask? Look for the following signals and swap out masks to ensure a successful process each and every time.

Welcome to the SECOND installment of our new masking experiment series! In this post, we will be taking you through what happens when you remove the tape right after powder gels and compare it to what happens when we remove tape after it cools down after the cure process.