Green Poly Pull Tab Discs
Green poly pull tab discs are used to mask holes, circular surfaces, and grounding areas during high-temperature processes, like Powder Coating and E-Coating.
Pull tab eliminates the need to dig razor blades or fingernails into the paint for removal.
Temp Rating: 400F / 204C
Recommended Processes: Powder Coating, E-Coating, Anodizing, Plating
Total Thickness: 3.5 mil (2 mil polyester film with 1.5 mil of green silicone adhesive)
Application: Apply discs to clean surface and then apply pressure via a roller or squeegee to ensure tape creates an effective masking seal
Technical Data Sheet