Green Poly Pull Tab Discs
As low as
$10.54
Green poly pull tab discs are used to mask holes, circular surfaces, and grounding areas during high-temperature processes, like Powder Coating and E-Coating.
Pull tab eliminates the need to dig razor blades or fingernails into the paint for removal.
Temp Rating: 400F / 204C
Recommended Processes: Powder Coating, E-Coating, Anodizing, Plating
Total Thickness: 3.5 mil (2 mil polyester film with 1.5 mil of green silicone adhesive)
Application: Apply discs to clean surface and then apply pressure via a roller or squeegee to ensure tape creates an effective masking seal
Technical Data Sheet
Custom Solutions
If we don't have what you need, let us know. You can visit our Custom Solutions page to read more, or go ahead and request a quote.
Related Products
